About GKD   •    Quality       Glossary        Library    •    Contact Information        Opportunities        Terms of Sale        Site Map        Home
 
Woven Mesh Products
• Square Weave
• Dutch Weave
• PZ Microdur Weave
• KPZ Microdur Weave
• Twilled Dutch Weave
• Multiplex Weave
• Sintered Laminate
• Optimized Plain Dutch Weave
• Tela Weave
• YMAX® Weave

Applications
Post Weaving Capabilities
Virtual Mesh Simulation

Optimized Plain Dutch Weave Data Sheet


Optimized Plain Dutch Weave cloth is used wherever fine filtration rates, high flow rates, and high dirt holding capacity is required.

Using special combinations of wires and mesh counts, Plain Dutch or PZ-Weaves are produced with a slotted surface structure, ensuring high flow rates and precise filtration rates.

Optimized Plain Dutch Weave cloths are available with apertures ranging from 10 µm to 80 µm. These cloths are less mechanically stable compared to PZ-Microdur or KPZ-Microdur weaves, and therefore are used only for smaller or well-supported filters.

Optimized Plain Dutch Weave cloths perform excellently as filter media in filter elements for highly viscous products such as oils and polymers.

Printer Friendly Version >

Optimized Plain Dutch Weave Data Sheet
Article
Number
Type Meshes
per Inch
Mesh
Thickness
in Inches/mm
Filter
Fineness
µm
Water Permeability
l/cm² x min
(dp = 200 mbar)
Air Permeability
l/m² x sec
(dp = 2 mbar)
13346000 Opt. Durch Weave 10 154x1740 .0039/.1 10 4.2 750
13375800 Opt. Durch Weave 20 110x1000 .0051/.13 20 5.8 1660
19370240 Opt. Durch Weave 25 867x101 .0079/.2 25 6.7 1920
19370315 Opt. Durch Weave 31 749x79 .0090/.23 31 7 2360
19370480 Opt. Durch Weave 48 546x69 .0094/.24 48 9 3740
19370550 Opt. Durch Weave 60 392x48 .0126/.32 60 10.3 4080
13372000 Opt. Durch Weave 60 43.6x400 .0134/.34 60 8.7 3300
19370780 Opt. Durch Weave 80 320x36 .0189/.48 80 11 4190
13371850 Opt. Durch Weave 80 40x318 .0157/.4 80 8 3090

©2010 GKD USA, Inc.